Mt. Rushmore Scanning Project a Success
Bookmark and Share

Elizabeth Lee
Vice President
2010-07-02

3D Capture of a National Monument

Mt. Rushmore Scanning Project a Success
Image created from photograph of team working and resulting scan data
Mt. Rushmore Scanning Project a Success
A partial team photo taken from the viewing terrace
CyArk recently completed the 3D capture of Mt. Rushmore. Part of a 5 year partnership with the National Memorial, the laser scanning portion of the project was completed by an incredible team from across the country and across the world.

Thanks to the efforts of all team members, the project was a huge success. Well over 200 scans were collected in a two-week period on site. This digital record of the sculpture and the park grounds will serve the on-going preservation efforts of the National Park Service. Additionally, the 3D content created from the scan data will be used for interpretation and education of the memorial.

CyArk is pulling together a few additional posts about the project fieldwork and data management, but we wanted to take this opportunity to thank all of our fantastic partners on this project.

The National Park Service, Mount Rushmore National Memorial team:
The project would not have come to fruition without the vision and support of the National Park Service. The Mount Rushmore staff is an amazing group of people. Everyone working at the park was involved in the effort required to complete the project. From the management team, to the interpretive rangers, to law enforcement, to the maintenance team, to the ropes team which cuts across all park divisions, everyone’s support was essential to the overall success of the project.

The Scottish Government and the newly formed Centre for Digital Documentation and Visualisation (CDDV):
With the completion of this project, Mt. Rushmore became the first international site captured as part of the Scottish 10. The 3D capture of the mountain would not have been possible without the generous contribution of the Scottish Government and the expertise of the CDDV. The capture team did an incredible job navigating the challenges of capturing all the complexities of the sculpture. Utilizing multiple machines from every angle, they captured the most comprehensive record of the mountain to date.

Respec Engineering:
Respec's knowledge of the mountain was invaluable throughout the project. Respec's local knowledge and years of experience with the rock helped to guide the capture that will be used for long term monitoring of the site. Respec also played an integral role in geo-referencing the scan data through the establishment of a control network on the mountain.

Wyss and Associates:

Local partner Wyss and Associates provided necessary support throughout the project. Solid expertise with the memorial's grounds helped contribute to the establishment of a control network throughout the park. This control network will be used to integrate scans on the grounds with scans on the mountain, and will be used for future monitoring and control at the park.

In addition to the project partners, we had a number of organizations contribute to the success of the project. We are very grateful for their support during the project and look forward to future work together.

Leica Geosystems:
Leica scanners were used throughout the project and the Leica team made sure we had everything we needed. Whether it was extra equipment or even additional hands on deck, Leica supported the project from beginning to end.

Hermanson Egge Engineering and All Metal Manufacturing:
The tricky scan positions on the mountain would not have been possible without the help from Hermanson Egge Engineering and All Metal Manufacturing. With their help we were able to design and fabricate a one of a kind rig to scan essential parts of the sculpture. They not only made sure the rig was structurally sound, they also made it look pretty darn good.

Sports Basement:
San Francisco Bay Area local outfitter Sports Basement made sure the CyArk team was properly equipped and attired for work on the mountain. Thanks to Sports Basement we stayed warm and looked sharp.

Thanks again to everyone involved for making this project a success. We are very proud of the work accomplished thus far and we look forward to the next steps.

Add Comment

Name:


Email:
 Email will not be displayed publicly

Add Comment:

Comments will not display until they are approved by CyArk staff


Enter Security Code:



While we generally try to approve as many comments as possible, any comments that contain profanity, are abusive, or are off topic will not be approved. We do not edit comments to meet approval. All links/urls entered will automatically be formatted to be a clickable link with an ref="nofollow" attribute inserted.

Related Articles

Mt. Rushmore Digital Preservation Project Prepares for Initial Survey Mt. Rushmore Digital Preservation Project Prepares for Initial Survey - November 16th, 2009
CyArk Prepares for Laser Scanning Mt. Rushmore CyArk Prepares for Laser Scanning Mt. Rushmore - May 8th, 2010
Highlights from the Mt. Rushmore Laser Scanning Project Highlights from the Mt. Rushmore Laser Scanning Project - July 2nd, 2010
Managing a Digital Mount Rushmore Managing a Digital Mount Rushmore - July 2nd, 2010
Mt. Rushmore Scanning Project a Success Mt. Rushmore Scanning Project a Success - July 2nd, 2010
Project Update: Mt. Rushmore Project Update: Mt. Rushmore - December 2nd, 2010
Work Begins on Next Phase of Mount Rushmore Project Work Begins on Next Phase of Mount Rushmore Project - March 4th, 2011
Beyond Rushmore and the Scottish Ten Beyond Rushmore and the Scottish Ten - April 29th, 2011
Remote Archipelago Captured as the Latest Site in Scottish Ten Remote Archipelago Captured as the Latest Site in Scottish Ten - July 28th, 2011
CyArk and the Scottish Ten Head to India CyArk and the Scottish Ten Head to India - October 21st, 2011
Next Phase in Digital Preservation at Mount Rushmore Next Phase in Digital Preservation at Mount Rushmore - February 24th, 2014

spacer

More News

Rosslyn Chapel Educational Content Now Available - 4 days ago
Japan selected as fifth & final international site for innovative Scottish Ten - August 11th, 2014
Speaker Preview: CyArk 500 Annual Summit - July 31st, 2014
Justin Barton to chair Technology Center Board - July 29th, 2014
American Students Help Preserve Italian Heritage - July 23rd, 2014